Heltec Indoor Hotspot

Heltec Indoor Hotspot

Main hardware

CPU: Quad-core Cortex-A53 64-bit 1.5GHz;
RAM: 2G DDR4;
ROM: 32G eMMC 5.1;
LoRa baseband: SX1308 + SX1255/7 chipset.

Network Connection

Wi-Fi: 2.4GHz/5GHz
Bluetooth: BT V5.0 EDR and BLE
Ethernet: 10/100M (Does not support PoE power supply, if must use PoE function, POE Splitter is must needed)

Body size

Without footpads and SMA antenna socket: 120 115 35
Include footpads and SMA antenna socket: 120 122.5 40

Interface and interactive

5.5mm diameter socket: 12V DC power source input;
RJ45 socket: Ethernet connection;
Anti-theft lock hole: Anti-theft lock interface;
Power Button with Blue LED;
SMA Socket: LoRa antenna with inner holes and threads;
Type C Socket: Firmware flash during production and system recovery for user;
1mm diameter hole: System recovery trigger, need to cooperate with the reset button or power-on sequence.

Status indication LEDs

Power Button with Blue LED
Five minutes blinking after power-on, Bluetooth can be connected at this time;
The Bluetooth connection is successful or the flickering stops after five minutes of booting.

White — System Status
Light up: System running.

Blue — Wi-Fi connection status

Orange — Blockchain synchronization instructions
Blink: Syncing
Steady ON: synchronization is over

Green — LoRa receive

Red — LoRa transmit

Other highlight function

A keyhole is reserved, which can be used for anti-theft.
Heltec Indoor Hotspot has a cooling fan inside, which can be used to take away the heat generated by the operation of the system to ensure long-time stable operation.